System Health Check; Power Off A Realpresence Group System - Polycom RealPresence Group Series Documentation

Related Topics
RealPresence Group System Power

System Health Check

After the system is powered on, the system automatically performs a system health check, which is
known as a power on self test (POST).
The status of the POST sequence is shown using the LED indicator light on the front of the device, or
in the text field display on the front of the system. For more information about what the colors of the
indicator lights mean, contact your administrator.
All test results are logged in the system memory. When the test sequence completes with no severe
errors, the system starts normally.
Related Topics
RealPresence Group System Power

Power Off a RealPresence Group System

Before changing any connected accessories, you need to power off the RealPresence Group system.
Procedure
•
Do one of the following:
◦
Touch and hold the power sensor on the front of the system.
◦
Press and hold
The indicator light changes color and blinks when the system is shutting down.
Related Topics
RealPresence Group System Power
Printed from Polycom, Inc. (http://documents.polycom.com)
on the remote control.
Page 9