Provisioning Parameters - Polycom G7500 Reference Manual

Provisioning Parameters

Topics:
▪ Provisioning Parameters
This section describes available configuration parameters for your provisioning setup. Included are
permitted values and, if applicable, guidance for configuring related parameters.
Provisioning Parameters
Use the following parameters to configure provisioning settings on your G7500 system.
prov.polling.period
Specifies your system's provisioning polling interval in seconds.
For example, if you set this parameter to "120", your system is provisioned every two minutes.
Integer >= 60
prov.heartbeat.interval
Specifies how often (in seconds) your system indicates it's available to the provisioning server.
This feature runs in the background and does not affect user experience.
Integer (120-600)
600 (default)
prov.softupdate.https.enable
Specifies whether your system gets software updates via HTTP or HTTPS.
0 (default) - Your system gets software updates via HTTP.
1 - Your system gets software updates via HTTPS.
Note: If you are using private PKI certificates in your environment and want HTTPS
downloads to work, you must install the trusted root certificate from your
internal certificate authority (CA) on the system using one of the
sec.TLS.customCaCert.* parameters.
Polycom, Inc. 55