Acceleration - Safety Vision RouteRecorder 4C SD SS User Manual

Acceleration

The Acceleration menu controls the
thresholds of the RouteRecorder 4C
SD SS's accelerometers that trigger an
overshock (SHK) event.
Use the remote control to configure the
following options:
EN: Select ON to enable the SHK event.
Select OFF to disable it.
THRESHOLD: Use the number keys on
the remote control to enter the amount
of force (in Gs) for each axis (X, Y, and Z)
at which the event is triggered.
ALARM: Select ON to enable the ALM
LED on the front of the RouteRecorder
4C SD SS when the THRESHOLD force is
reached and an event is triggered. This
LED continues to flash after an event is
triggered until the configuration menus
are accessed.
LOCK: Select ON to lock the video of the event recorded when the THRESHOLD force
is reached (not allowing it to be overwritten).
For more information about
connecting the RouteRecorder 4C
SD SS to to an accelerometer unit,
please contact Safety Vision Technical
Support.
37