Table of Contents
Advertisement
RouteRecoRdeR 4c Sd SS uSeR guide
The RouteRecorder 4C SD SS must have
a clear GPS signal to syncronize its time
via GPS, or it must have network access
to syncronize by NTP.
Configuration
Time: Use the number keys on the remote to set the current time manually.
FORMAT: Select from 12 hour (12H) or 24 hour (24H) time formats.
TIME SYNC SOURCE: Select Global Positioning System (GPS), Network Time Protocol
(NTP), or manual (NONE).
TIME ZONE: Select how many hours the local time zone is deviated from GMT. (In
the United States, Eastern is "-5", Central is "-6", Mountain is "-7", and Pacific is "-8".)
SYNC TIME: Use the number keys on the remote to manually enter the time at
Select the Configuration icon to
display the System, Record, Network,
and Event menus.
These menu options allow you to
configure how the MDVR operates,
in addition to setting passwords and
updating the firmware.
System Menu
date/time
The Date/Time menu determines the
system time that appears on recorded
video.
Date: Use the number keys on
the remote to set the current date
manually.
FORMAT: Select from middle endian
(MM/DD/YYYY), little endian (DD/MM/
YYYY), or big endian (YYYY-MM-DD)
date formats.
which the RouteRecorder 4C SD SS
synchronizes the time by NTP.
NTP SERVER IP: Use the number keys
on the remote control to manually enter
the IP address of the server by which the
RouteRecorder 4C SD SS synchronizes
time by NTP.
DST: Turn Daylight Savings Time
adjustments on (ON) or off (OFF).
DST MODE: Only available when DST is
set to ON. Select AUTO to adjust the time
automatically at 2:00 AM on the second
Sunday in March and the first Sunday in
November, or select CUSTOM to select
which Sundays in which months.
Advertisement
Table of Contents
