Sub-Stream - Safety Vision RouteRecorder 4C SD SS User Manual

Sub-Stream

The Sub-Stream menu is similar to the
Record Setting menu, except it controls
the quality of video when networked
with a central management system
(CMS).
MODE SET: Select MODE1 or MODE2
and then select SURE. MODE1 refers to
LAN or WiFi networks. MODE2 refers to
other wireless networks.
Select the following for each channel:
EN: Select ON to enable this camera for
sub-streaming. Select OFF to disable it.
RES: Select the resolution for this camera
when sub-streaming. Select from CIF or
QCIF.
FR: Select the frame rate in seconds of
this camera when sub-streaming. Select
from 1 to 30 FPS.
QUALITY (MODE1 only): Select the
quality of recording when substreaming,
with 1 being the best and 8 being the
lowest.
BIT (MODE1 only): Select a bit-rate
consistent with your agency's wireless
hardware.
SUB-STREAM MODE (MODE2 only):
Select ADAPT or FIX. Selecting ADAPT
allows the RouteRecorder 4C SD SS to
automatically select the optimal bit-rate;
selecting FIX sets the bit-rate to the entry
in the BIT field.
Adjust these settings to achieve the
optimal data transfer rate to image
quality ratio.
27