Table of Contents
Advertisement
39
low voltage Protection
The Low Voltage Protection menu
controls the voltage threshold before
the RouteRecorder 4C SD SS shuts down
automatically to protect itself.
Use the remote control to configure the
following:
ENABLE: Select ON to enable voltage
protection.
VOLTAGE: Use the number keys to enter
the minimum voltage, in volts, that the
RouteRecorder 4C SD SS can receive
before it automatically disconnects from
the CMS or shuts down.
TIME FOR CMS: Select the time, in
minutes, that the RouteRecorder 4C SD
SS can continue to receive the voltage
indicated in the VOLTAGE field before
disconnecting from the CMS. Select OFF
to disable automatic disconnection.
SHUT DOWN DELAY: Select the time, in minutes, that the RouteRecorder 4C SD
SS can continue to receive the voltage indicated in the VOLTAGE field before
automatically shutting down. Select OFF to disable automatic shutdown.
Advertisement
Table of Contents
