Table of Contents
Advertisement
RouteRecoRdeR 4c Sd SS uSeR guide
If an event is trigger while another
event is being recorded it will be
considered one event. The event will
end after the second trigger and the
time specified in the ALARM DURATION
field.
Record Menu
time, from 1 to 30 seconds, to be recorded and marked as an event.
ALARM POST REC TIME: Select the amount of time, from 30 to 1800 seconds, to be
recorded after triggering an event.
options (Page 1)
The Options menu contains most of
the parameters that control how long
and when the RouteRecorder 4C SD
SS records video.
VIDEO TYPE: Select NTSC or PAL.
RECORD MODE: Select GENERAL to
began full-time recording automatically
when the RouteRecorder 4C SD SS is
powered on. Select TIMER to begin
recording as defined in the Time Record
menu. Select EVENT to record only when
an event is triggered.
NORMAL RECORD RATE: Select
NORMAL to record video at the quality
specified in the Record Setting menu at
all times. Select 1 FRAME to normally
record only 1 frame per second, until
an event is triggered, when recording
will automatically switch to the quality
specified in the Record Setting menu.
This option is useful to conserve storage
space.
ALARM PRE-REC TIME: Select the
amount of time, from 1 to 60 minutes, to
be recorded prior to triggering an event.
ALARM DURATION: Select the amount of
Advertisement
Table of Contents
