Table of Contents
Advertisement
COMh-sdID User Guide
3.7.5 Temperature Sensors
The modules's processor is capable of reading its internal temperature. The on-module Hardware
Monitor (HWM), located in the embedded controller (EC), uses an on-chip temperature sensor to
measure the modules's temperature on the board.
Figure 7: Module Temperature Sensor
3.7.6 On-Module Fan Connector
The module's fan connector powers, controls and monitors an external fan. To connect a standard 3-
pin connector fan to the module, use Kontron's fan cables:
KAB-HSP 200 mm (96079-0000-00-0)
KAB-HSP 400 mm (96079-0000-00-2)
www.kontron.com
35/58
Advertisement
Table of Contents
