Maintenance; Maintenance Of The Peristaltic Pump Type Sr25.2 (Optional) - M&C EC-30C Instruction Manual

10 Maintenance

Dangerous voltage!
Risk of death by electric shock!
DANGER
Do not open the deep-cooler!
Disconnect power supply before opening the device for access.
Make sure that all external power supplies are disconnected.
Before starting any maintenance work, please make sure that any work done on the device
is in compliance with all relevant regulations and standards.
Depending on the degree of pollution of the ambient air, the cooling fins of the condens-
er need to be cleaned with pressure air periodically.
The intervals between servicing are dependent on the process and system conditions in
your facility. The facility QA/QC plan should address the frequency for maintenance and
should be updated based on your operations.

10.1 Maintenance of the peristaltic pump type SR25.2 (optional)

Dangerous voltage!
Risk of death by electric shock!
Do not open the device!
DANGER
Disconnect power supply before opening the device for access.
Make sure that all external power supplies, including all alarm and
control circuits, are disconnected.
Flexible tube, conveying belt, contact pulleys and contact springs are the only consum-
ables of the pump. Depending on the operating conditions, the flexible tubing needs to
be checked and, if necessary, changed every three to six months.
The service interval of the EC-30C can be set according to the re-
quired maintenance interval of the peristaltic pump. You can find the
Note
details about setting the service interval on page 36 chapter '7.9.1
Parameter settings' .
Before starting any maintenance work, please make sure that any work done on the device
is in compliance with all relevant regulations and standards.
Please find details to spare parts for the SR25.2 peristaltic pump on
Note
page 70 chapter '12.3 Spare parts and consumables' .
EC-30C | 1.00.02 +49 2102 935 888 www.mc-techgroup.com
58