Additional Information; Declaration Of Conformity - M&C EC-30C Instruction Manual

Type and name of the product
(C) Consumables
(R) recommended spare parts
(S) spare parts
Part-No. Name
90 P 1007 SR25.2: Tubing set
with PVDF-tube connectors 4/6mm, standard
90 P 1020 SR25.2: Driver, complete
90 P 1050 SR25.2: Conveying belt
90 P 1045 SR25.2: Contact pulley SR25 PVDF for driver
90 P 1010 SR25.2: 1 set (4 pcs) contact springs SR25 for
driver
* Fuse set EC-30C includes fuses for main, power supply and rectifier electronics.
** The O-ring set Silicone EC-30C for the deep-cooling units DCU 1 and DCU 2 includes 2 x Ø 60 mm and 3 x Ø 16 mm
O-rings. If you disassemble a deep-cooling unit, you always have to replace all five O-rings.
*** Each heat exchanger delivery includes 5 g (0.011 lb) heat conductivity paste. You will need additional heat conduct-
ing paste, if you insert the heat exchanger after cleaning.

12.4 Additional Information

More information about the EC-30C can be found on our website:
www.mc-techgroup.com

12.5 Declaration of conformity

CE - Certification
The EC-30C complies with the following EU directives:
EMC directives
The EC-30C complies with the EC directive 2014/30/EU 'Electromagnetic compatibility'.
Low Voltage Directive
The EC-30C meets the requirements of the Low Voltage Directive 2014/35/EU.
To ensure the compliance with this EC directive, the EC-30C conforms to the DIN EN 61010
standard.
Declaration of conformity
The EU Declaration of conformity can be downloaded from the M&C website or directly
requested from M&C.
71
EC-30C | 1.00.02
recommended amount
based on number of
years of operation [years]
C/R/S
C
S
S
S
R
+49 2102 935 888 www.mc-techgroup.com
1 2 3
1 2 4
- 1 1
- 1 2
2 4 4
1 2 2