1. Installation
1.1 General instructions on installation
CP-DN8 9806NH
WARNING
Before undertaking installation or maintenance work,
switch off the following:
• the compressed air supply
• the operating voltage for the bus
interface/internal logic
• the load voltage supply to the valves.
You will thereby avoid:
– Uncontrolled movements of loose tubing.
– Unintentional movements of the connected actuators.
– undefined switching states of the electronic compo-
nents.
CAUTION
The CPV valve terminal contains electrostatically
vulnerable components.
• Do not therefore touch the contact surfaces of the
components.
• Observe the regulations for handling
electrostatically vulnerable components.
You will thereby prevent damage to the electronic com-
ponents.
1-3