Festo CPV Series Manual page 15

Compact performance cpv valve terminal with direct link

Hide thumbs Also See for CPV Series:

Table of Contents

1. Installation

1-6

Setting the node address

You can set the node address of the CPV valve termi-

nal with the address selector switches. The switches

are numbered from 0 to 9. The arrow on the switches

indicates the units or tens figure of the node address

which is set.

Address selector switch for UNITS figures

Address selector switch for TENS figures

Fig. 1/3: Address selector switch

PLEASE NOTE

Node addresses may only be assigned once per

module/scanner.

Recommendation:

Assign the numbers in ascending order. If necessary,

take into account the machine structure of your system

when assigning the addresses.

CP-DN8 9806NH

Table of Contents