Festo CPV Series Manual page 29
Compact performance cpv valve terminal with direct link
Hide thumbs
Also See for CPV Series:
- Brief description (56 pages) ,
- Programming and diagnosis (77 pages) ,
- Manual (76 pages)
Table of Contents
Advertisement
1. Installation
Bus/logic
supply
1-20
Avoid long distances between the bus interface/logic
power supplies and the CPV valve terminal.
PLEASE NOTE
Bus slaves of other manufacturers have different
tolerances in resepct of the supply to the interface.
Take this into account when designing the bus
length and placing the power unit.
Recommendation:
Place the power unit approximately in the centre of the
bus. The following tolerance for the bus interface
supply applies to Festo CPV valve terminals:
V
= 25.0 V
max
V
= 11.5 V
min
CP-DN8 9806NH
Advertisement
Table of Contents
