Mount The Servomotor With Parallel Key To The Kq Or K8 Adapter - Siemens SIMOGEAR BA 2039 Operating Instructions Manual

Installing
3.5 Mounting the motor
3.5.3

Mount the servomotor with parallel key to the KQ or K8 adapter

NOTICE
Damage to the bearing caused by excessive forces
Avoid axial forces when installing on the motor.
Note
Dimension z12 applies for standard assignment of the coupling. If a special assignment is
required, consult the appropriate special dimension drawing.
Note
Reduce assembling force
Lightly grease the gear ring tooth flanks of the flexible element 1557 or the hub with the
supplied assembly paste.
Alternatively the following are permissible:
• Mineral-oil based oils or greases
• Silicon-based lubricants
• Petroleum jelly.
1505 Bolt
1555 Coupling half
1556 Coupling half
Image 3-5
24
ATEX version gearboxes
Impacts can cause sparks.
Apply adhesive (medium strength, e.g. Loctite 243) to the grub screw 1564 and
bolts 1505.
KQ and K8 adapters
1557 Flexible element
1564 Grub screw
Operating Instructions, 04/2016, A5E37431501A/RS-AC
BA 2039