Managing The Fx Series Rfid Readers; Profiles; Reset Reader - Motorola FX7400-22350A30-US Integrator Manual

4 - 2 FX Series RFID Readers Integrator Guide

Managing the FX Series RFID Readers

The reader must be powered up (see
accessible network. The power LED is green indicating the reader is ready. If the green power LED is not lit, reset
the reader. See Reset Reader on page
NOTE The screens and windows are provided for illustration purposes only and may differ from actual screens.
The applications described may not be available on (or applicable to) all devices.
Procedures are not device specific and are intended to provide a functional overview.

Profiles

Use profiles for multiple reader deployments to save configuration time, as only a few APIs are needed to
completely configure a reader. See

Reset Reader

To reset the reader, press and hold the reset button for not more than 2 seconds. See
the reset button location. This resets the reader and retains the user ID and password. The reader reboots. See
System Start-up/Boot LED Sequence on page
NOTE Hard rebooting the reader (disconnecting power) is not recommended. A hard reboot discards all the tag
events and system log information.
System Start-up/Boot LED Sequence on page
4-2.
Reader Profiles on page 4-27.
3-7.
3-7) and connected to an
Figure 2-4 on page 2-5 for