Rfid Reader Setup; Usb Connection Setup (Windows Ce 5.0) - Motorola RD5000 Integrator Manual

RFID Reader Setup

The RFID reader can be set up to communicate with a USB connection.
accessory setup and cable connection information for use with the RFID reader. The RFID reader
communication settings must be set to match the communication settings used with ActiveSync.

USB Connection Setup (Windows CE 5.0)

The RD5000 USB setup is controlled through the CTLPanel. The default setting is USB, to confirm or change the
setting perform the following.
From the RD5000 main window (see
application.
Main Windows
Figure 4-18
From main Explorer window (see
CtlPanel window appears (see
Explorer Windows
Figure 4-19
Figure 4-18) click Start - Programs - Windows Explorer to access the Explorer
Figure 4-18) click Application - CTLPANEL to access the CTLPANEL utility. The
Figure 4-19). Double-click on Comm Settings to access the USB settings window.
ActiveSync 4 - 11
Chapter 3, Accessories provides the