Motorola FX7400-22350A30-US Integrator Manual page 96

E - 2 FX Series RFID Readers Integrator Guide
Set
4. Obtain IP Address via DHCP
Reader Communication Parameters Window
Figure E-2
Click
5. Set Properties
Click
6. Commit/Revert
Commit/Revert Window
Figure E-3
The message
7.
device and use the reader with the static IP network.
to and enter all required information.
Off
. You can set a static IP that doesn't belong to this DHCP network.
, then click the
Commit
Reader IP Address config has changed. Needs reader reboot to take effect
button.
appears. Reset the