5 - 2
FX Series RFID Readers Integrator Guide
Point of Sale (POS)
Example Parameters
The reader reads up to 10 different tags (1" x 4" RFID embedded garment tags) in the targeted read zone.
Installation
•
One 5" x 5" (5.5 dBic with 100
table is RF penetrable material).
•
The reader is mounted underneath the table (see
Configuration
•
Reader power: 20 dBm
•
Reader profile or tag population: Small (see
•
Session: Session 1 (default)
Back Room Inventory Fill
Example Parameters
The reader reads 100 tagged T-shirts in a cardboard box in five seconds at a distance of 2 - 6 feet.
Installation
•
Two AN480 antennas: one antenna is mounted 1.5 feet above the box, the second antenna is mounted one
foot below the box.
•
The reader is mounted underneath the table (see
Configuration and Optimization
•
Reader power: 30 dBm
•
Reader profile or tag population: Medium (see
•
Session: Session 1
o
beam width) antenna is mounted one foot below the service table (service
Chapter 3, Installation and
Reader Profiles on page
Chapter 3, Installation and
Reader Profiles on page
Communication).
4-27)
Communication).
4-27)