Chapter 1 Quick Start
This chapter provides a Quick Start setup demonstration.
Quick Start Demonstration
The Quick Start demonstration offers a simple, temporary way to quickly set up the reader and read tags. The
Step 1, Setup on page 1-1
Step 2, Host Name Connect on page 1-2
Step 3, First Time / Start-Up Login on page 1-3
Step 4, Set Region on page 1-4
Step 5, Read Tags on page 1-6
Step 1, Setup
For information on complete component kits available from Motorola, see
Unpack the reader. See
Set up the reader and tags on a desktop.
Connect the antenna to antenna Port 1. See
Connect the Ethernet cable to the Ethernet port. See
Connecting the reader to a subnet that supports DHCP is recommended. This Quick Start procedure is not
guaranteed to work if DHCP is disabled in the reader and if the reader is connected directly to a PC.
Connect the AC power supply to a power outlet and connect to the power port. See
NOTE This step is not required for networks supporting Power-over-Ethernet (POE).
Unpacking the Reader on page
Appendix A, Technical