4 - 24 FX Series RFID Readers Integrator Guide
SNMP Settings
Select
to view the
SNMP
allow sending Network Status Events and receiving Network Status Event notifications:
•
Send SNMP Trap To
no traps to any host.
•
SNMP Community String
•
SNMP Version
•
Send Server Heartbeat
NOTE Send SNMP Trap To and Send Server Heartbeat take effect immediately after clicking Set Properties.
However, perform a Commit to persist the changes. The modified SNMP Community String and SNMP
Version are not affected until the reader reboots.
Configure SNMP Settings Window
Figure 4-23
Configure SNMP Settings
- Configures the host IP address to which the SNMP trap is sent. Leave this blank to send
- SNMP community string to use for SNMP set and get.
- SNMP version to use in the reader. Supported versions are
- Sends a heartbeat message periodically to the configured SNMP host.
window. Use this window to configure the SNMP host settings to
and
.
V1
V2c