4 - 20 FX Series RFID Readers Integrator Guide
Communication Settings
Use the
Communication
Configure Network Settings
Select
to view the
Network
configuration via DHCP, and manual configuration.
The
Obtain IP Address via DHCP:
address, subnet mask, default gateway, and DNS server. These values are obtained from the DHCP server so
cannot be manually changed.
To manually set the values, toggle the DHCP to Off and enter the values:
•
Current IP Address
•
Subnet Mask
•
(in dotted notation)
Gateway
•
(in dotted notation)
DNS Server
•
MAC Address
•
– Configures the web server in either HTTP (unsecure) or HTTPS (secure) mode.
Web Server
•
– Configures the Shell to either Telnet (unsecure) or SSH (secure) mode, or disables the shell.
Shell
•
– Configures the File server to either FTP (unsecure) or FTPS (secure) mode, or disables the
File Server
shell.
NOTE The network configuration updates only upon clicking Commit. If the commit is not successful, the
system indicates the problem and allows repeating the operation. DHCP and IP address changes update
only upon reader reboot.
Click
1.
Communication
Configure Network Settings Window
Figure 4-21
submenus to access the following functions.
Configure Network Settings
button toggles the DHCP
(in dotted notation)
(in dotted notation)
– Specifies the reader MAC address.
>
. The
Network
Configure Network Settings
window. The reader supports both automatic TCP/IP
or
. Turning DHCP on displays the current IP
On
Off
window appears.