Step 2, Host Name Connect - Motorola FX7400-22350A30-US Integrator Manual

1 - 2 FX Series RFID Readers Integrator Guide
Wait for the green power LED to stay lit. See
6.
details.
Port 1
Antenna Ports (Four Ports, Reverse TNC)
FX Series RFID Reader Rear Panel Connections
Figure 1-1

Step 2, Host Name Connect

Open a browser. Recommended browsers are IE6, IE7, IE8, or Mozilla 3.
1.
Enter the host name, provided on the CD label, in the browser (e.g., http://fx7400cd3b0d) and press
2.
The
User Login
NOTE Connect the reader to a network that supports host name registration and lookup to ensure the network
can access the reader using the host name. For instance, some networks can register hostnames
through DHCP. When first connecting to the reader, it is recommended to keep DHCP enabled, although
it is not guaranteed that hostname will work in this case. Use the host name provided on the CD label, or
construct it using the reader MAC address on the bottom of the reader. The host name is a string with the
prefix FX7400, followed by the last three MAC address octets. For example, for a MAC address of
00:15:70:CD:3B:0D, use the prefix FX7400, followed by the last three MAC address octets (CD, 3B, and
0D), so the host name is FX7400CD3B0D. Type http://FX7400CD3B0D in the browser address bar to
access the reader.
Port 2 Port 3 Port 4
Reset
window appears and the reader is ready.
System Start-up/Boot LED Sequence on page 3-7
GPIO
GPIO USB 10/100BaseT Ethernet
(with POE)
for boot-up
24 VD
Power
.
Enter