Motorola FX7400-22350A30-US Integrator Manual page 57

Change communication related settings by entering information in the text boxes or using the drop-down lists.
2.
See Table 4-1 for descriptions of available options.
Configure Network Settings
Table 4-1
Setting
Obtain IP Address The Dynamic Host Configuration Protocol server
using DHCP running on networks can assign a dynamic IP
address to the host and readers. Contact the
system administrator to determine if the network
supports DHCP.
Current IP Address If manually assigning an IP address to the reader,
check with the system administrator to ensure the IP
address is valid in the network.
Subnet Mask A mask used to determine to what subnet an IP
address belongs.
Gateway The reader uses this IP address to access another
network.
DNS Server The reader uses the Domain Name System (DNS)
IP address to translate domain names.
MAC Address Reader MAC address.
Web Server Select the port type.
Shell Select the Shell type. Configure the Shell to either
Telnet (unsecure) or SSH (secure) mode, or disable
the shell.
File Server Configure the file server to either FTP (unsecure) or
FTPS (secure) mode, or disable the shell.
Click .
3. Set Properties
Click to return to the
4. Main
Click . See
5. Commit/Revert
Click to save the changes or
6. Commit
Description
main window.
Administrator Console
Commit/Revert on page 4-32.
to discard the changes. See
Discard
Administrator Console 4 - 21
Possible Values
Select the On or the Off button.
IP address to assign to the reader.
IP address dynamically assigned or
user-entered.
Depends on network configuration.
Depends on network configuration.
Checked (enabled) / unchecked
(disabled).
Commit/Revert on page 4-32.