10/100/1000Base-T Ethernet Port; 100/1000Base-X Sfp Port - H3C S3100V2 Series Installation Manual

10/100/1000Base-T Ethernet port

All S3100V2 switches provide 10/100/1000Base-T auto-sensing Ethernet ports on their front panels.
Table 19 10/100/1000Base-T Ethernet port specifications
Item
Connector type
Interface attributes
Max transmission distance
Transmission medium
Standards

100/1000Base-X SFP port

All S3100V2 switches provide 100/1000Base-X SFP ports on their front panels, and you can install the
hot swappable 100 Mbps or 1000 Mbps SFP transceiver modules in
distance connections.
Table 20 SFP transceiver modules available for the H3C S3100V2 Switch Series
Category
1000 Mbps
transceiver
modules
1000 Mbps
BIDI
transceiver
modules
100 Mbps
SFP
transceiver
modules
Transceiver module
SFP-GE-SX-MM850-A
SFP-GE-LX-SM1310-A
You must
SFP-GE-LX-S
use these
M1310-BIDI
two
SFP-GE-LX-S
transceiver
M1490-BIDI
s in pairs.
SFP-FE-SX-MM1310-A
SFP-FE-LX-SM1310-A
Specification
RJ-45
•
10 Mbps, full/half duplex
•
100 Mbps, full/half duplex
•
1000 Mbps, full duplex
•
MDI/MDI-X, auto-sensing
100 m (328.08 ft)
Category-5 (or above) twisted pair cable
IEEE 802.3i, 802.3u, 802.3ab
Central
Connector
wavelength
850 nm
LC
1310 nm
TX: 1310 nm
RX: 1490 nm
LC
TX: 1490 nm
RX: 1310 nm
1310 nm LC
54
Table 20 in the ports for long
Max
Fiber transmission
distance
50/125 μm
550 m
multimode
(1804.46 ft)
optical fiber
62.5/125 μm
275 m
multimode
(902.23 ft)
optical fiber
9/125 μm
10 km (6.21
single mode
miles)
optical fiber
9/125 μm
10 km (6.21
single mode
miles)
optical fiber
62.5/125 μm
2 km (1.24
multimode
miles)
optical fiber
9/125 μm
15 km (9.32
single mode
miles)
optical fiber