Table of Contents
Advertisement
10/100/1000BASE-T Ethernet port
Table4-19 10/100/1000BASE-T Ethernet port specifications
Item
Connector type
Rate, duplex mode, and
auto-MDI/MDI-X
Max transmission
distance
Transmission medium
Compliant standard
Compatible devices
Combo interface
The
S5590-28T8XC-HI,
S5590-28P8XC-EI switches each provide four combo interfaces on the front panel. A combo
interface contains an SFP port and a 10/100/1000BASE-T autosensing Ethernet port. Only one of
these two ports can operate at a time.
LEDs
System status LED
The system status LED shows the operating status of the switch.
Table4-20 System status LED description
LED mark
SYS
Power status LED
For the S5590-EI switch series, the power status LED shows the operating status of a power supply.
Table4-21 Power status LED description
LED mark
PWR1/PWR2
Specification
RJ-45
•
10 Mbps, half/full duplex
•
100 Mbps, half/full duplex
•
1000 Mbps, full duplex
•
MDI/MDI-X autosensing
100 m (328.08 ft)
Category 5 or above twisted pair cable
IEEE 802.3i, 802.3u, and 802.3ab
All device models (excluding the S5590-48S4XC-HI and S5590-48S4XC-EI
switches)
S5590-28S8XC-HI,
Status
Steady green
Flashing green (1 Hz)
Steady red
Off
Status
Description
Steady green
The power supply is operating correctly.
S5590-28T8XC-EI,
Description
The switch has started correctly.
The switch is performing power-on self test (POST).
The switch has failed the POST or is faulty.
The switch is powered off.
S5590-28S8XC-EI,
and
Advertisement
Table of Contents
