Safety With Laser; Examining The Installation Site; Temperature Requirements; Humidity Requirements - H3C S3100V2 Series Installation Manual

Figure 14 Use an ESD-preventive wrist strap
(1) Rack post

Safety with laser

The S3100V2 Switch Series is a line of class 1 laser products. When a transceiver module on an
S3100V2 switch is operating, do not stare into the optical port because the laser light emitted from the
optical fiber may hurt your eyes.

Examining the installation site

The S3100V2 Switch Series must be used indoors. To ensure normal operation and long service life of
your switch, install it in an environment that meets the requirements described in the following
subsections.

Temperature requirements

To ensure the normal operation of the switch, make sure that the room temperature meets the
requirements described in
Table 2 Temperature requirements
Temperature
Operating temperature
Storage temperature
CAUTION:
If condensation appears on the switch when you move it to a high-temperature environment, dry the switch
before powering it on to avoid short circuits.

Humidity requirements

Maintain appropriate humidity in your equipment room, as described in
1
Table 2.
Range
0°C to 45°C (32°F to 113°F)
–40°C to +70°C (–40°F to +158°F)
9
Table 3.