H3C S3100V2 Series Installation Manual page 47

CAUTION:
If you log in to the switch through the console port after powering on the switch, no boot information is
•
displayed, and you will enter the command line interface (CLI).
The output information varies depending on the software version.
•
Starting......
************************************************************************
*
* H3C S3100V2-26TP-PWR-EI BOOTROM, Version 107
*
************************************************************************
Copyright(c) 2004-2011 Hangzhou H3C Technologies Co., Ltd.
Creation Date
CPU Clock Speed : 200MHz
Memory Size
Flash Size
CPLD Version
PCB Version
Mac Address
Press Ctrl-B to enter Extended Boot menu...0
Starting to get the main application file--flash:/S3100V2_EI.bin!.................
..............................................................
The main application file is self-decompressing................................
...............................................................................
...............................................................................
...............................................................................
...............................................................................
...............................................................................
...............................................................................
...............................................................................
...............................................................................
.............................Done!
System is starting...
User interface aux0 is available.
Press ENTER to get started.
Press Enter and the system displays the following prompt:
<H3C>
This prompt indicates that the switch is ready to configure. For more information about initial switch
configuration, see "Initially configuring the
: Jan 19 2011,10:54:47
: 128MB
: 16MB
: 003
: Ver.A
: 000FE2B162C4
switch."
41
*
*
*