Table of Contents
Advertisement
Installation Manual
H3C S3610 Series Ethernet Switches
Keep the device far from radio transmitting stations, radar stations, and
high-frequency devices.
Use electromagnetic shielding when necessary, for example, use shielded
interface cables.
Route interface cables only indoors to prevent signal ports from getting damaged
by overvoltage or overcurrent caused by lightning strikes.
2.2.4 Laser Safety
The S3610 series are class-1 laser devices.
When the optical ports on your switch are operating, do not stare into the optical ports
because the laser light emitted by the optical fiber can hurt your retina.
Caution:
Staring into the laser beam produced by the fiber can hurt your eyes.
2.3 Installation Tools
Flat-blade screwdriver
Phillips screwdriver
ESD-preventive wrist strap
Caution:
The installation tools are not provided with the S3610 series.
Chapter 2 Installation Preparation
2-3
Advertisement
Table of Contents
