Table of Contents
Advertisement
To remove the media drive carrier from the chassis
1.
2. Locate the media drive carrier, and loosen the four Phillips-head screws and
Figure 25: Remove media drive from chassis
3. Hold cables away from the drive bay as you pull the media drive carrier away from
Avaya CallPilot® 1002rp Server Maintenance and Diagnostics
Danger:
Risk of electrocution
High current inside the chassis can cause severe injury.
Caution:
Risk of equipment damage
Electrostatic discharge due to improper handling can cause components to be
damaged or rendered unusable.
Remove the front bezel from the chassis. See
cover
on page 75.
washers securing the carrier to the drive bay, as shown in
drive from chassis
on page 103.
the chassis until the connectors attached behind the components can be reached.
Caution:
Risk of equipment damage
Media drive carrier slot assignment
Removing the front bezel and server
Figure 25: Remove media
December 2010
103
Advertisement
Table of Contents
