Net Start Command; Service Control Start Command - Avaya CallPilot 1002rp Maintenance And Diagnostics

Using serial port diagnostic tools

Net Start command

Use the Net Start command to restart a specified service on a serial port. The syntax for the
Net Start command is as follows:
net start <service name>
To invoke the Net Start command from Windows
1. Click Start → Programs → Accessories → Command Prompt.
2. At the Command prompt, type net start "service_name", and then press Enter.
3. Type Exit, and then press Enter to exit the Command Prompt window.

Service Control Start command

Use the Service Control Start command to restart a specified service on a serial port. The
syntax for the Service Control Start command is as follows:
sc <service name>
To invoke the Service Control Start command from Windows
1. Click Start → Programs → Accessories → Command Prompt.
2. At the Command prompt, type sc start "service_name", and then press Enter.
3. Type Exit, and then press Enter to exit the Command Prompt window.
46 Avaya CallPilot® 1002rp Server Maintenance and Diagnostics
Result: The Command Prompt window appears.
For example, type net start "Remote Access Server", and then press Enter.
Note:
The quotation marks are required, as in the example above.
Result: The Command Prompt window appears.
For example, type sc start "Remote Access Server", and then press Enter.
Note:
The quotation marks are required, as in the example above.
December 2010