Flat bezel panel pc with intel celeron j1900 quad-core pcu, touchscreen, dual usb 3.0, dual gbe lan, rs-232, hd audio, wi-fi 802.11a/b/g/n/ac, ip 65 rating and rohs (130 pages)
Industrial panel pc for 2nd/3rd generation intel core, pentium or celeron cpu, intel h61 express chipset, touchscreen, usb 3.0, dual gigabit lan supporting sfp fiber, ip 66 compliant front panel and rohs compliant (156 pages)
AFL-08AH-N270-CR Panel PC MODEL: AFL-08AH-N270-CR Fanless 8.4” Panel PC with 1.6 GHz Intel® Atom™ Processor TFT LCD, Wireless LAN, Touch Screen, Six USB Ports User Manual Page I Rev. 1.02 – 1 October, 2012...
Page 2
AFL-08AH-N270-CR Panel PC Revision Date Version Changes 1 October, 2012 1.02 Added Manual Conventions Added warning messages on page 22, 24 and 39. 5 October, 2010 1.01 Minor changes 9 September, 2010 1.00 Initial release Page II...
Page 3
AFL-08AH-N270-CR Panel PC Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
Cautionary messages should also be heeded to help reduce the chance of losing data or damaging the AFL-08AH-N270-CR. Cautions are easy to recognize. The word “caution” is written as “CAUTION,” both capitalized and bold and is followed. The italicized text is the cautionary message.
Page 5
“NOTE,” both capitalized and bold and is followed by text. The text is the cautionary message. A note message is shown below: NOTE: This is an example of a note message. Notes should always be read. Notes contain critical information about the AFL-08AH-N270-CR. Please take note messages seriously. Page V...
Page 6
AFL-08AH-N270-CR Panel PC WARNING: This equipment has been tested and found to comply with the limits for a Class A and Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
AFL-08AH-N270-CR Panel PC Table of Contents 1 INTRODUCTION......................1 1.1 O ........................2 VERVIEW 1.1.1 Features ......................2 1.1.2 Application ......................3 1.2 E ....................3 XTERNAL VERVIEW 1.2.1 General Description................... 3 1.2.2 Front Panel ......................3 1.2.3 Rear Panel ......................4 1.2.4 I/O Interface Panel ....................
Page 8
AFL-08AH-N270-CR Panel PC 2.7.1 Power Adapter ....................16 2.7.2 Power Connector ..................... 16 2.8 W ..................16 IRELESS ONNECTIONS 3 UNPACKING ....................... 18 3.1 U ......................19 NPACKING 3.1.1 Packing List ..................... 20 4 INSTALLATION ......................21 4.1 A ..................22...
Page 9
AFL-08AH-N270-CR Panel PC 5.6 R ..................44 EINSTALLING THE OVERS 6 AMI BIOS SETUP ....................... 46 6.1 I ......................47 NTRODUCTION 6.1.1 Starting Setup....................47 6.1.2 Using Setup ...................... 47 6.1.3 Getting Help..................... 48 6.1.4 Unable to Reboot After Configuration Changes..........48 6.1.5 BIOS Menu Bar....................
Page 10
AFL-08AH-N270-CR Panel PC B SAFETY PRECAUTIONS ..................87 B.1 S ..................... 88 AFETY RECAUTIONS B.1.1 General Safety Precautions ................88 B.1.2 Explanation of Graphical Symbols..............89 B.1.3 Classification....................89 B.1.4 Anti-static Precautions ..................89 B.1.5 Product Disposal ..................... 90 B.2 M ............
Page 11
AFL-08AH-N270-CR Panel PC List of Figures Figure 1-1: AFL-08AH-N270-CR Flat Panel PC ................2 Figure 1-2: AFL-08AH-N270-CR Front View .................4 Figure 1-3: AFL-08AH-N270-CR Rear View ..................4 Figure 1-4: AFL-08AH-N270-CR I/O Interface Connector Panel..........5 Figure 1-5: AFL-08AH-N270-CR Top View..................5 Figure 1-6: AFL-08AH-N270-CR Side View...................6 Figure 2-1: AFL-08AH-N270-CR Dimensions (mm) ..............10...
AFL-08AH-N270-CR Panel PC 1.1 Overview Figure 1-1: AFL-08AH-N270-CR Flat Panel PC The AFL-08AH-N270-CR is Intel® Atom™ powered flat panel PC with a rich variety of functions and peripherals. An Intel® 945GSE graphics memory controller hub (GMCH) coupled with an Intel®...
USB 2.0, reset button, power connector and power switch. 1.2.2 Front Panel The front side of the AFL-08AH-N270-CR is a flat panel TFT LCD screen surrounded by an ABS/PC plastic frame. The top of the front panel has a power LED.
The rear panel provides access to retention screw holes that support the wall mounting. Refer to Figure 1-3. Figure 1-3: AFL-08AH-N270-CR Rear View 1.2.4 I/O Interface Panel The I/O interface panel located on the bottom of the AFL-08AH-N270-CR has the following I/O interface connectors: Page 4...
The external I/O interface connector panel is shown in Figure 1-4. Figure 1-4: AFL-08AH-N270-CR I/O Interface Connector Panel 1.2.5 Top Panel and Side Panels The top panel and side panels of AFL-08AH-N270-CR provide access to slots that support panel mount and rack mount (Figure 1-5). Figure 1-5: AFL-08AH-N270-CR Top View...
AFL-08AH-N270-CR Panel PC Figure 1-6: AFL-08AH-N270-CR Side View 1.3 Internal Overview The AFL-08AH-N270-CR has the following components installed internally: 1 x Motherboard 1 x 1.0 GB 533 MHz DDR2 SDRAM SO-DIMM 1 x Wireless module 1 x CF card Page 6...
AFL-08AH-N270-CR Panel PC 1.4 System Specifications The technical specifications for the AFL-08AH-N270-CR systems are listed in Table 1-1. Specification AFL-08AH-N270-CR LCD Size 8.4” Max. Resolution 800 x 600 Contrast Ratio 600:1 Brightness (cd/m LCD Color 262K Pixel Pitch (H x V) (mm) 0.213 x 0.213...
Page 22
1 x 12 V DC input jack 1 x Audio line-out connector 1 x Audio mic-in connector 2 x RJ-45 for LAN 6 x USB 2.0 ports 1 x Power switch 1 x Reset button Table 1-1: AFL-08AH-N270-CR System Specifications Page 8...
AFL-08AH-N270-CR Panel PC 2.1 Dimensions The AFL-08AH-N270-CR dimensions are shown in Figure 2-1 Figure 2-1: AFL-08AH-N270-CR Dimensions (mm) Page 10...
The following sections describe some of the features on the motherboard. 2.3.1 Installed Memory One 200-pin 1.0 GB 533 MHz DDR2 SDRAM SO-DIMM is installed in the AFL-08AH-N270-CR and controlled by the Intel® 945GSE GMCH installed on the internal motherboard. Page 11...
MHz DDR2 SDRAM SO-DIMM. If additional memory is required, please contact a sales representative and discuss the necessary system requirement. 2.3.3 Storage Capacity The AFL-08AH-N270-CR supports an easily installed CompactFlash® Type II (CF Type II) memory disk. 2.4 External Peripheral Interface Connectors The following section describes the external peripheral interface connectors on the bottom panel of the subsystem.
AFL-08AH-N270-CR Panel PC Figure 2-3: RJ-45 Ethernet Connectors The PCIe lane from the Intel® ICH7 chipset of the AFL-08AH-N270-CR is interfaced to the Realtek RTL8111CP PCIe gigabit Ethernet (GbE) controllers. The RTL8111CP controllers are then connected directly to the RJ-45 connectors on the bottom panel and provides external GbE connectivity.
Figure 2-4: External USB Ports 2.5 Front Side 2.5.1 Monitor A LCD screen is installed on the front of the AFL-08AH-N270-CR. The monitor maximum resolution is 800 x 600. The screen is shown in Figure 2-5 below. Figure 2-5: LCD Screen 2.5.2 Touch-Screen Module...
The audio connectors are shown in Figure 2-6. Figure 2-6: Audio Jack 2.6.2 Stereo Speakers Two internal 1.5 W stereo speakers on the sides of the AFL-08AH-N270-CR are interfaced to the system through a Philips TDA1517p integrated class-B dual output amplifier.
Figure 2-8: Power Connector 2.8 Wireless Connections An integrate PIFA antenna on the AFL-08AH-N270-CR ensures an uninterrupted wireless connection. PIFA antennas can receive high-quality, uniform signals in any location from all directions without any signal degradation or impedance and are the most efficient antennas on the market.
AFL-08AH-N270-CR Panel PC 3.1 Unpacking To unpack the flat panel PC, follow the steps below: WARNING! The front side LCD screen has a protective plastic cover stuck to the screen. Only remove the plastic cover after the flat panel PC has been properly installed.
AFL-08AH-N270-CR Panel PC 3.1.1 Packing List The AFL-08AH-N270-CR flat panel PC is shipped with the following components: Quantity Item Image Standard AFL-08AH-N270-CR Power adapter (PMP60-12-B12) Power cord Screw kit User manual CD and driver CD Touch pen If any of these items are missing or damaged, contact the distributor or sales representative immediately.
Electrostatic discharge (ESD) can cause serious damage to electronic components, including the AFL-08AH-N270-CR. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the AFL-08AH-N270-CR is accessed internally, or any other electrical component is handled, the following anti-static precautions are strictly adhered to.
AFL-08AH-N270-CR Panel PC 4.2 Installation Precautions When installing the flat panel PC, please follow the precautions listed below: Power turned off: When installing the flat panel PC, make sure the power is off. Failing to turn off the power may cause severe injury to the body and/or damage to the system.
Over-tightening back cover screws will crack the plastic frame. Maximum torque for cover screws is 5 kg-cm (0.36 lb-ft/0.49 Nm). To access the AFL-08AH-N270-CR internally the back cover must be removed. To remove the back cover, please follow the steps below.
AFL-08AH-N270-CR Panel PC Remove the retention screws securing the internal aluminum cover (Figure 5-2). Step 3: Figure 4-2: Aluminum Back Cover Retention Screws Lift the aluminum cover off the AFL-08AH-N270-CR. Step 4: Step 0: 4.6 Jumper Settings NOTE: A jumper is a metal bridge used to close an electrical circuit.
Jumper Settings: See Table 4-1 If the AFL-08AH-N270-CR fails to boot due to improper BIOS settings, the clear CMOS jumper clears the CMOS data and resets the system BIOS information. To do this, use the jumper cap to close the pins for a few seconds then remove the jumper clip.
AFL-08AH-N270-CR Panel PC The four methods of mounting the AFL-08AH-N270-CR are listed below. Wall mounting Panel mounting Arm mounting Rack mounting The four mounting methods are described below. 4.7.1 Wall Mounting To mount the flat panel PC onto the wall, please follow the steps below.
Page 42
AFL-08AH-N270-CR Panel PC Insert the four monitor mounting screws provided in the wall mount kit into the Step 6: four screw holes on the real panel of the flat panel PC and tighten until the screw shank is secured against the rear panel (Figure 4-4).
AFL-08AH-N270-CR Panel PC Figure 4-4: Chassis Support Screws Secure the panel PC by fastening the retention screw of the wall-mounting Step 9: bracket. (Figure 4-5). Figure 4-5: Secure the Panel PC Page 29...
AFL-08AH-N270-CR Panel PC 4.7.2 Panel Mounting To mount the AFL-08AH-N270-CR flat panel PC into a panel, please follow the steps below. Select the position on the panel to mount the flat panel PC. Step 1: Cut out a section from the panel that corresponds to the rear panel dimensions Step 2: of the flat panel PC.
When purchasing the arm please ensure that it is VESA compliant and that the arm has a 75 mm interface pad. If the mounting arm is not VESA compliant it cannot be used to support the AFL-08AH-N270-CR flat panel Page 31...
PC. Step 0: 4.7.4 Cabinet and Rack Installation The AFL-08AH-N270-CR flat panel PC can be installed into a cabinet or rack. The installation procedures are similar to the panel mounting installation. To do this, please follow the steps below:...
AFL-08AH-N270-CR flat panel PC and the rack/cabinet into which the AFL-08AH-N270-CR is installed. Slide the rear chassis of the AFL-08AH-N270-CR flat panel PC through the Step 1: rack/cabinet bracket until the aluminum frame is flush against the front of the bracket (Figure 4-9).
AFL-08AH-N270-CR Panel PC Figure 4-10: Secure the Rack/Cabinet Bracket Slide the flat panel PC with the attached rack/cabinet bracket into a rack or Step 4: cabinet (Figure 4-11). Figure 4-11: Install into a Rack/Cabinet Page 34...
To connect a LAN cable with an RJ-45 connector, please follow the instructions below. Locate the RJ-45 connectors on the bottom panel of the AFL-08AH-N270-CR. Step 1: Align the connectors. Align the RJ-45 connector on the LAN cable with one of Step 2: the RJ-45 connectors on the bottom panel of the AFL-08AH-N270-CR.
AFL-08AH-N270-CR Panel PC 4.8.2 USB Device Connection WARNING: Accessory equipment connected to the analog and digital interfaces must be in compliance with the respective nationally harmonized IEC standards (i.e. IEC 60950 for data processing equipment, IEC 60065 for video equipment, IEC 61010-1 for laboratory equipment, and IEC 60601-1 for medical equipment.)
AFL-08AH-N270-CR Panel PC Figure 4-13: USB Device Connection Insert the device connector. Once aligned, gently insert the USB device Step 3: connector into the onboard connector. Step 0: Page 37...
Only certified engineers should install and modify the hardware settings. Incorrect settings can cause irreparable damage to the system. 5.1 System Maintenance Introduction If the components of the AFL-08AH-N270-CR fail, please contact the system reseller or vendor. Components that can be replaced include: CF Module Wireless LAN module SO-DIMM module Back cover removal instructions for the AFL-08AH-N270-CR are described below.
During the time the board is handled, frequently touch any conducting materials that are connected to the ground. Use an anti-static pad: - When configuring the AFL-08AH-N270-CR, place it on an antic-static pad. This reduces the possibility of ESD damaging the AFL-08AH-N270-CR.
AFL-08AH-N270-CR Panel PC To access the AFL-08AH-N270-CR internally the back cover must be removed. To remove the back cover, please follow the steps below. Follow all anti-static procedures. See Section 5.2. Step 1: Turn off the power. See Section 5.3.
AFL-08AH-N270-CR Panel PC Figure 5-2: Aluminum Back Cover Retention Screws Lift the aluminum cover off the AFL-08AH-N270-CR. Step 2: Step 0: 5.5 Replacing Components 5.5.1 Memory Module Replacement The flat panel PC is preinstalled with a 1 GB DDR2 memory module. If the memory module is fail, follow the instructions below to replace the memory module.
DDR memory module in the socket.Step 0: Figure 5-4: DDR SO-DIMM Module Installation 5.5.2 CF Card Replacement The AFL-08AH-N270-CR is preinstalled one CF Type II card. To replace the CF card, follow the instructions below. Follow all anti-static procedures. See Section 5.2. Step 1: Turn off the power.
AFL-08AH-N270-CR Panel PC Figure 5-5: CF Card Location Insert a new CF card into the slot. Step 5: Replace the plastic back cover.. Step 6: Once replaced reinsert the nine previously removed retention screws. Step 7: Step 0: WARNING: Over-tightening back cover screws will crack the plastic frame.
AFL-08AH-N270-CR Panel PC 6.1 Introduction A licensed copy of AMI BIOS is preprogrammed into the ROM BIOS. The BIOS setup program allows users to modify the basic system configuration. This chapter describes how to access the BIOS setup program and the configuration options that may be changed.
AFL-08AH-N270-CR Panel PC F1 key General help, only for Status Page Setup Menu and Option Page Setup Menu F2 /F3 key Change color from total 16 colors. F2 to select color forward. F10 key Save all the CMOS changes, only for Main Menu Table 6-1: BIOS Navigation Keys 6.1.3 Getting Help...
AFL-08AH-N270-CR Panel PC 6.2 Main The Main BIOS menu ( B IOS Menu 1) appears when the BIOS Setup program is entered. The Main menu gives an overview of the basic system information. BIOS Menu 1: Main System Overview The System Overview lists a brief summary of different system components. The fields in System Overview cannot be changed.
AFL-08AH-N270-CR Panel PC The System Overview field also has two user configurable fields: System Time [xx:xx:xx] Use the System Time option to set the system time. Manually enter the hours, minutes and seconds. System Date [xx/xx/xx] Use the System Date option to set the system date. Manually enter the day, month and year.
AFL-08AH-N270-CR Panel PC BIOS Menu 2: Advanced 6.3.1 CPU Configuration Use the CPU Configuration menu ( B IOS Menu 3) to view detailed CPU specifications and configure the CPU. BIOS Menu 3: CPU Configuration Page 51...
AFL-08AH-N270-CR Panel PC The CPU Configuration menu (BIOS Menu 3) lists the following CPU details: Manufacturer: Lists the name of the CPU manufacturer Brand String: Lists the brand name of the CPU being used Frequency: Lists the CPU processing speed...
AFL-08AH-N270-CR Panel PC compatible mode. In this mode, a SATA channel will replace one of the IDE channels. This mode supports up to 4 storage devices. Configures the on-board ATA/IDE controller to be in Enhanced Enhanced mode. In this mode, IDE channels and SATA channels are separated.
AFL-08AH-N270-CR Panel PC 6.3.2.1 IDE Master, IDE Slave Use the IDE Master and IDE Slave configuration menu to view both primary and secondary IDE device details and configure the IDE devices connected to the system. BIOS Menu 5: IDE Master and IDE Slave Configuration Auto-Detected Drive Parameters The “grayed-out”...
AFL-08AH-N270-CR Panel PC Block Mode: Block mode boosts IDE drive performance by increasing the amount of data transferred. Only 512 bytes of data can be transferred per interrupt if block mode is not used. Block mode allows transfers of up to 64 KB per interrupt.
AFL-08AH-N270-CR Panel PC LBA/Large Mode [Auto] Use the LBA/Large Mode option to disable or enable BIOS to auto detects LBA (Logical Block Addressing). LBA is a method of addressing data on a disk drive. In LBA mode, the maximum drive capacity is 137 GB.
AFL-08AH-N270-CR Panel PC PIO mode 3 selected with a maximum transfer rate of 11.1MBps PIO mode 4 selected with a maximum transfer rate of 16.6MBps (This setting generally works with all hard disk drives manufactured after 1999. For other disk drives, such as IDE CD-ROM drives, check the specifications of the drive.)
AFL-08AH-N270-CR Panel PC 6.3.3 Super IO Configuration Use the Super IO Configuration menu ( B IOS Menu 6) to set or change the configurations for the FDD controllers, parallel ports and serial ports. BIOS Menu 6: Super IO Configuration Serial Port1 Address [3F8/IRQ4] Use the Serial Port1 Address option to select the Serial Port 1 base address.
AFL-08AH-N270-CR Panel PC Serial Port1 Mode [Normal] Use the Serial Port1 Mode option to select the transmitting and receiving mode for the first serial port. Serial Port 1 mode is normal Normal EFAULT Serial Port 1 mode is IrDA IrDA...
AFL-08AH-N270-CR Panel PC Fan is off when the temperature is low Automatic mode enough. Parameters must be set by the user. Pulse width modulation set manually PWM Manual mode When the CPU FAN Mode Setting option is in the Automatic Mode, the following parameters can be set.
AFL-08AH-N270-CR Panel PC CPU Temp. Limit of Start [020] WARNING: Setting this value too high may cause the fan to start only when the CPU is at a high temperature and therefore cause the system to be damaged. The CPU Temp. Limit of Start option can only be set if the CPU FAN Mode Setting option is set to Automatic Mode.
AFL-08AH-N270-CR Panel PC mode increases with respect to an increase in temperature. A list of available options is shown below: 0.125 PWM 0.25 PWM 0.5 PWM 1 PWM 2 PWM 4 PWM 8 PWM 15 PWM The following system parameters and values are shown. The system parameters that are...
AFL-08AH-N270-CR Panel PC BIOS Menu 8: Power Configuration 6.3.5.1 ACPI configuration The ACPI Configuration menu ( B IOS Menu 9) configures the Advanced Configuration and Power Interface (ACPI). BIOS Menu 9: ACPI Configuration Page 63...
AFL-08AH-N270-CR Panel PC Suspend Mode [S1(POS)] Use the Suspend Mode BIOS option to specify the sleep state the system enters when it is not being used. System appears off. The CPU is stopped; RAM is S1 (POS) EFAULT refreshed; the system is running in a low power mode.
AFL-08AH-N270-CR Panel PC The system remains turned off Power Off The system turns on Power On The system returns to its previous state. If it was on, it Last State EFAULT turns itself on. If it was off, it remains off.
AFL-08AH-N270-CR Panel PC Wake event not generated by an incoming call Disabled EFAULT Wake event generated by an incoming call Enabled Resume on PCI-Express WAKE# [Enabled] Use the Resume PCI-Express WAKE# BIOS option to enable activity on the PCI-Express WAKE# signal to rouse the system from a suspend or standby state.
AFL-08AH-N270-CR Panel PC BIOS Menu 11: Remote Access Configuration [Advanced] Remote Access [Disabled] Use the Remote Access option to enable or disable access to the remote functionalities of the system. Remote access is disabled. Disabled EFAULT Remote access configuration options shown below...
AFL-08AH-N270-CR Panel PC Serial Port Number [COM1] Use the Serial Port Number option allows to select the serial port used for remote access. System is remotely accessed through COM1 COM1 EFAULT NOTE: Make sure the selected COM port is enabled through the Super I/O configuration menu.
AFL-08AH-N270-CR Panel PC Loader Redirection is always active (Some OSes may not Always EFAULT work if set to Always) Terminal Type [ANSI] Use the Terminal Type BIOS option to specify the remote terminal type. The target terminal type is ANSI...
AFL-08AH-N270-CR Panel PC USB Functions [Enabled] Use the USB Function option to enable or disable the USB controllers. USB controllers are enabled Disabled USB controllers are disabled Enabled EFAULT USB 2.0 Controller [Enabled] The USB 2.0 Controller BIOS option enables or disables the USB 2.0 controller...
AFL-08AH-N270-CR Panel PC The controller is capable of operating at high speed HiSpeed EFAULT 480 Mb/s 6.4 PCI/PnP Use the PCI/PnP menu ( B IOS Menu 13) to configure advanced PCI and PnP settings. WARNING: Setting wrong values for the BIOS selections in the PCIPnP BIOS menu may cause the system to malfunction.
AFL-08AH-N270-CR Panel PC The specified IRQ is reserved for use by Legacy ISA Reserved devices Available IRQ addresses are: IRQ3 IRQ4 IRQ5 IRQ7 IRQ9 IRQ10 IRQ 11 IRQ 14 IRQ 15 DMA Channel# [Available] Use the DMA Channel# option to assign a specific DMA channel to a particular PCI/PnP device.
AFL-08AH-N270-CR Panel PC Reserved Memory Size [Disabled] Use the Reserved Memory Size BIOS option to specify the amount of memory that should be reserved for legacy ISA devices. No memory block reserved for legacy ISA devices Disabled EFAULT 16KB reserved for legacy ISA devices...
AFL-08AH-N270-CR Panel PC BIOS Menu 15: Boot Settings Configuration Quick Boot [Enabled] Use the Quick Boot BIOS option to make the computer speed up the boot process. No POST procedures are skipped Disabled Some POST procedures are skipped to decrease...
AFL-08AH-N270-CR Panel PC AddOn ROM Display Mode [Force BIOS] The AddOn ROM Display Mode option allows add-on ROM (read-only memory) messages to be displayed. Allows the computer system to force a third party Force BIOS EFAULT BIOS to display during system boot.
AFL-08AH-N270-CR Panel PC Spread Spectrum Function [Disabled] The Spread Spectrum Function option can help to improve CPU EMI issues. The spread spectrum mode is disabled Disabled EFAULT The spread spectrum mode is enabled Enabled 6.6 Security Use the Security menu ( B IOS Menu 16) to set system and user passwords.
AFL-08AH-N270-CR Panel PC Change User Password Use the Change User Password to set or change a user password. The default for this option is Not Installed. If a user password must be installed, select this field and enter the password. After the password has been added, Install appears next to Change User Password.
AFL-08AH-N270-CR Panel PC 6.7.1 North Bridge Chipset Configuration Use the North Bridge Chipset Configuration menu (BIOS Menu 18) to configure the Northbridge chipset settings. BIOS Menu 18:North Bridge Chipset Configuration Memory Hole [Disabled] The Memory Hole reserves the memory space between 15MB and 16MB for ISA expansion cards that require a specified area of memory to work properly.
AFL-08AH-N270-CR Panel PC Disable 1MB of memory used by internal graphics device Enable, 1MB 8MB of memory used by internal graphics device Enable, 8MB EFAULT DVMT Mode Select [DVMT Mode] Use the DVMT Mode Select option to select the Intel Dynamic Video Memory Technology (DVMT) operating mode.
AFL-08AH-N270-CR Panel PC LFP Panel Type [by H/W] Use the LFP Panel Type option to select the type of flat panel connected to the system. Configuration options are listed below. 640x480 18b 800x480 18b 800x600 18b 1024x768 18b 1280x1024 36b...
AFL-08AH-N270-CR Panel PC Audio Controller [Auto] The Audio Controller option enables or disables the audio controller. The on-board audio controller automatically Auto EFAULT detected and enabled. The on-board HD Audio controller is enabled. Azalia The on-board AC’97 audio controller is enabled.
AFL-08AH-N270-CR Panel PC Discard Changes and Exit Use the Discard Changes and Exit option to exit the BIOS configuration setup program without saving the changes made to the system. Discard Changes Use the Discard Changes option to discard the changes and remain in the BIOS configuration setup program.
AFL-08AH-N270-CR Panel PC A.1 Motherboard Specifications The system comes with an AFLMB-945GSE-N270-AV-R10 motherboard. The detailed specifications for the motherboard are listed below. Specification AFLMB-945GSE-N270-AV-R10 Northbridge Intel® 945GSE Southbridge Intel® ICH7 Processor 1.6 GHz Intel® Atom™ N270 processor FSB Speed 533 MHz Supported Memory One 200-pin 2.0 GB (max.) 533 MHz or 400 MHz DDR2 SDRAM SO-DIMM...
24 KB write-back data cache Thermal Design Power 2.5 W Tjunction 0 to 90°C A.3 Screen Specifications The AFL-08AH-N270-CR comes with a TFT LCD monitor at the front of the flat panel PC. Specifications for the screens are shown below. SPECIFICATION AFL-08AH-N270-CR Model AUO-G084SN05_V8 Size 8.4”...
AFL-08AH-N270-CR Panel PC A.4 Touch Screen Specifications The AFL-08AH-N270-CR comes with an analog resistive type touch panel. The touch panel specifications are listed below. SPECIFICATION AFL-08AH-N270-CR Model PANJIT 1084403B Type Analog Resistive Type Touch Panel Wire Type 4-wire Viewing Area (mm) 130.75 x 173.38...
Do not apply voltage levels that exceed the specified voltage range. Doing so may cause fire and/or an electrical shock. Electric shocks can occur if the AFL-08AH-N270-CR chassis is opened when the AFL-08AH-N270-CR is running. Do not drop or insert any objects into the ventilation openings of the AFL-08AH-N270-CR.
AFL-08AH-N270-CR and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the AFL-08AH-N270-CR. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the AFL-08AH-N270-CR is opened and any of the electrical components are handled, the following anti-static precautions are strictly adhered to.
AFL-08AH-N270-CR Panel PC Wear an anti-static wristband: Wearing a simple anti-static wristband can help to prevent ESD from damaging any electrical component. Self-grounding: Before handling any electrical component, touch any grounded conducting material. During the time the electrical component is handled, frequently touch any conducting materials that are connected to the ground.
When maintaining or cleaning the AFL-08AH-N270-CR, please follow the guidelines below. B.2.1 Maintenance and Cleaning Prior to cleaning any part or component of the AFL-08AH-N270-CR, please read the details below. Except for the LCD panel, never spray or squirt liquids directly onto any other components.
In such case, the product will be explicitly mentioned in the cleaning tips. Below is a list of items to use when cleaning the AFL-08AH-N270-CR. C loth – Although paper towels or tissues can be used, a soft, clean piece of cloth is recommended when cleaning the AFL-08AH-N270-CR.
AFL-08AH-N270-CR Panel PC BIOS Configuration Options Below is a list of BIOS configuration options described in Chapter 6. System Overview .........................49 System Time [xx:xx:xx] .......................50 System Date [xx/xx/xx] ......................50 ATA/IDE Configurations [Compatible]................52 Legacy IDE Channels [PATA Pri, SATA Sec] ..............53 ...
Page 109
AFL-08AH-N270-CR Panel PC System Time .........................66 Remote Access [Disabled]....................67 Serial Port Number ......................67 Serial Port Mode........................67 Redirection after BIOS POST....................67 Terminal Type........................67 Serial Port Number [COM1]....................68 Base Address, IRQ [3F8h,4]....................68 Serial Port Mode [115200 8,n,1]..................68 ...
AFL-08AH-N270-CR Panel PC Appendix Watchdog Timer Page 97...
Page 112
AFL-08AH-N270-CR Panel PC NOTE: The following discussion applies to DOS environment. The Watchdog Timer is provided to ensure that standalone systems can always recover from catastrophic conditions that cause the CPU to crash. This condition may have occurred by external EMI or a software bug. When the CPU stops working correctly, Watchdog Timer either performs a hardware reset (cold boot) or a Non-Maskable Interrupt (NMI) to bring the system back to a known state.
AFL-08AH-N270-CR Panel PC NOTE: When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets. Example program: ; INITIAL TIMER PERIOD COUNTER W_LOOP: AX, 6F02H ;setting the time-out value BX, 05 ;time-out value is 5 seconds ;...
AFL-08AH-N270-CR Panel PC E.1 UL 60601-1 AND CAN/CSA C22.2 NO. 601.1 Authentication sign of Standard Inspection Bureau for U.S.A. Complies with UL 60601-1 AND CAN/CSA C22.2 NO. 601.1. E.2 EN 60601-1 TUV Rheinland Product Safety safety mark for compliance with EN 60601-1.