Reviewing The Hardware Status In Santricity System Manager - NetApp StorageGRID SG5700 Series Hardware Installation And Maintenance Manual

Reviewing the hardware status in SANtricity System Manager

You can use SANtricity System Manager to monitor and manage the individual hardware
components in the appliance and to review hardware diagnostic and environmental information, such
as component temperatures, as well as issues related to the drives.
Steps
1. Open a web browser on a management client, and enter the URL for SANtricity System Manager:
https://E2800_Controller_IP
The log in page for SANtricity System Manager appears.
2. Enter the administrator password.
3. Click Cancel to close the Set Up wizard and to display the SANtricity System Manager home
page.
The SANtricity System Manager home page appears. In SANtricity System Manager, the
appliance is referred to as a
4. Review the information displayed for appliance hardware and confirm that all hardware
components have a status of Optimal.
a. Click the Hardware tab.
b. Click Show back of shelf.
storage array .
Configuring the hardware | 51