NetApp StorageGRID SG5700 Series Hardware Installation And Maintenance Manual page 23

See "10/25-GbE port connections for the E5700SG controller" for more information about
Note:
the options for these ports.
Information needed
Client Network enabled
Network bond mode
VLAN tagging enabled
VLAN tag
(if VLAN tagging is enabled)
DHCP-assigned IP address for the Client
Network, if available after power on
Static IP address you plan to use for the
appliance Storage Node on the Client Network
If the Client Network is enabled, the
Note:
default route on the controller will use the
gateway specified here.
Related concepts
Port bond modes for E5700SG controller ports
Related tasks
Configuring the hardware
Related references
Reviewing appliance network connections
Your value
Choose one:
•
•
Choose one:
•
•
Choose one:
•
•
Enter a value between 0 and 4095:
•
•
•
•
on page 17
on page 34
on page 15
Preparing for installation | 23
No (default)
Yes
Active-Backup (default)
LACP (802.3ad)
No (default)
Yes
IPv4 address (CIDR):
Gateway:
IPv4 address (CIDR):
Gateway: