NetApp StorageGRID SG5700 Series Hardware Installation And Maintenance Manual page 50

50 | Hardware Installation and Maintenance Guide for SG5700 Appliances
• Administrator password for accessing SANtricity System Manager
Steps
1. Open a web browser on a management client, and enter the URL for SANtricity System Manager:
https://E2800_Controller_IP
The log in page for SANtricity System Manager appears.
2. Enter the administrator password.
3. Click Cancel to close the Set Up wizard and to display the SANtricity System Manager home
page.
4. Configure hardware alerts.
a. Select Help to access the online help for SANtricity System Manager.
b. Use the Settings > Alerts section of the online help to learn about alerts.
c. Follow the "How To" instructions to set up email alerts, SNMP alerts, or syslog alerts.
5. Manage AutoSupport for the appliance hardware.
a. Select Help to access the online help for SANtricity System Manager.
b. Use the Support > Support Center section of the online help to learn about the AutoSupport
feature.
c. Follow the "How To" instructions to manage AutoSupport for the appliance hardware.
6. If the Drive Security feature is enabled for the appliance and FDE or FIPS drives are installed,
create and manage the security key.
a. Select Help to access the online help for SANtricity System Manager.
b. Use the Settings > System > Security key management section of the online help to learn
about Drive Security.
c. Follow the "How To" instructions to create and manage the security key.
The E2800 controller acts as a simplex controller. The security key needed to
Attention:
unlock the drives is saved to the E2800 controller but not to the E5700SG controller. You must
be able to locate your key identifier, pass phrase, and the downloaded key file in case the
E2800 controller fails and needs to be replaced.
7. Optionally, change the administrator password.
a. Select Help to access the online help for SANtricity System Manager.
b. Use the Home > Storage array administration section of the online help to learn about the
administrator password.
c. Follow the "How To" instructions to change the password.