NetApp StorageGRID SG5700 Series Hardware Installation And Maintenance Manual page 64

64 | Hardware Installation and Maintenance Guide for SG5700 Appliances
e. Enter the provisioning passphrase, and click OK.
A confirmation message lists the URLs you can use to access the StorageGRID Appliance
Installer while the controller is in maintenance mode.
f. Wait a few minutes for the controller to reboot into maintenance mode. Then, browse to any of
the URLs displayed.
Note: If possible, use the URL containing the IP address of the appliance's Admin Network
port.
Accessing
Note:
management port.
g. Confirm that the appliance is in maintenance mode by noting the maintenance mode message
on the StorageGRID Appliance Installer home page.
3. If the E2800 controller is functioning sufficiently to allow for a controlled shutdown, confirm that
all operations have completed.
a. From the home page of SANtricity System Manager, select View Operations in Progress.
b. Confirm that all operations have completed.
https://169.254.0.1:8443
requires a direct connection to the local