Insert An Air Filter (Optional) In The Fan Drawer - Polycom RealPresence RMX 4000 Hardware Manual

RealPresence Collaboration Server (RMX) 4000 Components and Components Replacement

Insert an Air Filter (Optional) in the Fan Drawer

In the fan drawer, an Air Filter can be added as an option. You must order this part through your next level
of support.
To insert an air filter in the fan drawer:
1 Ensure that the power switch/circuit switch on the RMX 4000 is turned OFF (O).
Caution: Replace the air filter when RMX 4000 is turned off
The air filter cannot be replaced when the RMX 4000 unit is ON.
2 Unscrew the captive screws on the front panel of the Fan drawer secured to the Fan chassis.
3 Use the finger grip, pull the Fan drawer out of its slot in the Backplane.
4 Carefully slide the Fan drawer out through the front panel.
5 Open the filter tray, by unscrewing two screws on the tray.
6 Remove the existing air filter.
Polycom, Inc. 68