Replace An Ac Power Supply Module - Polycom RealPresence RMX 4000 Hardware Manual

RealPresence Collaboration Server (RMX) 4000 Components and Components Replacement

Replace an AC Power Supply Module

Two units supply power to the RMX 4000 (3rd optional - AC only), each unit with its own power cord. Use
the following procedure to replace a Power Supply unit.
Warning: Power supply type
Please verify the type of power supply used on your RMX 4000. Do not insert a different type of
power supply than the type currently installed on your system.
To replace an AC power supply module:
1 Unscrew the captive screws on the front panel of the Power Supply unit that secures the unit to the
chassis.
2 Using your right hand, press your thumb on the pressure latch and with your fingers inserted in the
hand grip (on top), pull the Power Supply unit out.
3 Carefully slide the Power Supply unit out from the front slot.
4 Slide in the replacement Power Supply unit.
Polycom, Inc. 65