Polycom RealPresence RMX 4000 Hardware Manual page 40

Collaboration server

Hide thumbs Also See for RealPresence RMX 4000:

Table of Contents

 When the one LAN port RTM ISDN card is installed: Connect the E1/T1 cables to PRI Ports.

Connect the LAN cable to LAN 1.

When LAN redundancy is enabled, LAN 1 is used for both management, media and signaling

network connection.Connect the media and signaling cable to LAN 2 port. By default this port is

used for signaling, but when LAN redundancy is enabled, LAN 2 is the backup of LAN 1 port.

 When the four LAN ports RTM ISDN card is installed:

 Connect the E1/T1 cables to PRI ports.

 In MPMRx card mode, connect the LAN cable to LAN1 and LAN 2.

 In MPMx card mode, connect the LAN cable to LAN 3 and LAN 4.

RealPresence Collaboration Server (RMX) 4000 rear panel with AC powers and communication cables

Polycom, Inc.

Install the RealPresence Collaboration Server (RMX) 4000

Table of Contents