Talkswitch 24-CA User Manual page 67

Configuring a local extension for use with a IP phone
1. Open the configuration software.
2. Select System Information -> Local Extensions.
3. Change the radio button from Regular Extension to IP Extension.
4. The default Username and Password are <user ext#> and <pass ext#>.
Change either as required.
Figure 55: IP extension
Please refer to the configuration guide for your IP phone in the
TalkSwitch documentation folder. If you are using a third-party IP phone,
refer to the user guide for that phone.
Once the phone has been programmed with the extension number,
username, password, registrar and proxy information you can confirm
registration as follows:
1. Connect the IP phone to the LAN with the Ethernet cable.
2. Connect the power to the IP phone.
3. Click the Refresh button when the phone indicates that it is registered.
Additional fields
Caller ID Information section
Last name/First name:
Enter the last and first name of the person associated with the extension. If
you want to include the person in the dial-by-name directory used by the
auto attendant, you must enter the last name. The name entered displays on
the Caller ID of other local extensions. The person using that extension is
required to record her/his name for the directory.
T A L K S W I T C H C O N F I G U R A T I O N 5 5