Talkswitch 24-CA User Manual page 116

Figure 102: Activating call bridge
How to use call bridge:
1. Call into the system from any out-of-office telephone.
2. At the auto attendant message, dial a hunt group you are authorized to
use (9 is default).
3. Enter the password and press
Each TalkSwitch unit has four password activated call bridge accounts.
4. At this point, you can dial a number the same way as from the office.
Each account can be configured to allow access to certain hunt groups
when using call bridge.
Figure 103: Hunt group access
1 0 4
# to access a TalkSwitch telephone line.
To activate an account, check the Activate Call
Bridge box and enter a 4- to 8-digit password.
Click the Hunt Group Access button and assign
the hunt groups for this account.
Line hunt group 80 is used for Same Line
Connect. To enable line hunt group 80, click the
checkbox next to Allow the use of Same Line
Connect [by dialing 80].
T A L K S W I T C H US ER GU ID E • NO R TH AM ER ICA