Talkswitch 24-CA User Manual page 203

510
*
* *
500–509
Flash/Hold 6
60
*
61
*
62
*
7 and
*
extension
Flash/Hold 7
80
9, 81–88
On an IP phone, press Dial, Send or
options:
80
*
84 and
*
extension
85 and
*
extension or
ring group number
88 and
*
account code
9
*
# or 55
*
A P P E N D I X A
Parks a call automatically in the first available parking
spot, starting at 500. Press Flash/Hold and
place a caller in the next available parking spot (park
orbit).
Retrieves a parked call.
Dial from a local extension to pick up a parked call.
Conference call for 3 parties.
Press Flash to put the first caller on hold, dial another
extension or external number and press Flash 6.
Disables Do Not Disturb at the current extension.
Enables Do Not Disturb at the current extension.
Toggles (enables/disables) Do Not Disturb at the
current extension.
Call pick-up at a specific extension.
Dial from dial tone to pick up a call ringing at
another extension.
Press Flash 7 to cycle through queued calls on a
first in/first out basis.
Accesses Same Line Connect when transferring an
outside caller to another outside number.
Dial to access an outside line.
#
Enable play music source through PA output.
Hands-free intercom call to an extension, automatically
answered in speaker mode, enabling instant hands-free
2-way communication (for supported sets).
Page a phone at an extension or the phones of a
ring group.
Attach account code to Call Detail Record (CDR)
for last call.
Call pick-up of any ringing line.
Enters command mode.
after your entry for the following
510 to
*
1 9 1