Auto Call Back - Talkswitch 24-CA User Manual

2. Let the line ring at least once, but no more than three times and hang
up. Make sure there is no auto attendant configured to answer after less
than 3 rings on this line.
3. Within less than 10 seconds, TalkSwitch will dial your auto call back
number. When you pick up, your recorded message will play.
Figure 98: TalkSwitch calling back
TalkSwitch
in your office
4. Accept the call by pressing
TalkSwitch that you are an authorized user and enables call access
through the TalkSwitch.
5. You will now hear a generic TalkSwitch auto attendant. You may access
your phone system as if you were in the office. Dial 9 for an outside line
and make a long-distance call using your office long-distance plan, listen
to your voicemail or transfer to a local extension.
Figure 99: Multiple calls to anywhere
Make multiple calls to
anywhere in the world

2.5.1 Auto call back

The TalkSwitch call back/call bridge feature gives you access to your office-
based long-distance savings plan from anywhere around the world.
Before call back is activated, all the call back settings must be configured.
To use auto call back, dial your office telephone number, let the call ring
twice and hang up.
You can configure four auto call back numbers.
1. Select Call Back/Call Bridge -> Auto Call Back.
2. Select Call Back 1. You can add more as needed.
T A L K S W I T C H C O N F I G U R A T I O N
TalkSwitch calls you back
or
Dial any Access any
or
extension mailbox
Any phone
anywhere
# . Enter your password. This confirms to
Any phone
anywhere
9 9