Talkswitch 24-CA User Manual page 121

Example: You receive a call on a phone in your home that is not a
TalkSwitch extension and you want to transfer the caller to remote
extension 215. You dial
hang up. TalkSwitch now handles the call.
Transfer and clear
TalkSwitch has the ability to clear lines after a call has been transferred.
Ensure you have this service/feature activated on your line(s). Check under
System Information -> Telephone Lines.
Remote transfer
Calls that are transferred to a remote or VoIP extension can be transferred
back to another extension or voice mailbox.
1. Dial
*
2. Enter the extension or mailbox number. If the extension is set to
screening calls, dial
cancel the transfer, dial
transfer, the call is automatically transferred and the line is released once
the extension or mailbox number has been entered.
When a call is transferred from one remote extension to another remote
extension or VoIP extension, it is always a blind transfer so that the three
lines are not tied up.
This feature can only be used when forwarding a call to a remote
extension or a VoIP location over two lines. It cannot be used with
3-way calling or Centrex transfer services.
T A L K S W I T C H C O N F I G U R A T I O N
, wait for the double beep, dial 215 and
* *
to place the caller on hold.
*
4 to complete the transfer. If you want to
* *
* *
5. If you have selected Perform a blind
1 0 9