Talkswitch 24-CA User Manual page 181

Information in those documents should be used instead of this guide. If
there is no configuration guide for your service provider, follow the
instructions below.
Figure 133: Service Provider profile
Service Provider Name:
Enter the name for your VoIP service provider. The name will be displayed
elsewhere in the configuration software in areas related to VoIP service.
Proxy Server Name:
Enter the IP address or domain name associated with the proxy server,
exactly as specified by your service provider. If the server is using a
different port than 5060, specify the port number after a colon at the
end of the domain or IP address.
Example: 222.234.432.234:5061
Registrar Server Name:
Enter the IP address or domain name associated with the registrar server,
exactly as specified by your service provider. If the server is using a
different port number than 5060, specify the port number after a colon
at the end of the domain or IP address.
Example: VoIP.domain.com:5061
Outbound Proxy:
Enter the outbound proxy (if required) associated with the service
provider.
V O I P I N F O R M A T I O N 1 6 9