Retrieving Data; Web Interface - Store To File On Talkswitch - Talkswitch 24-CA User Manual

4. File -> Save to TalkSwitch
Figure 113: Save settings
When storing the CDR to a file on TalkSwitch, approximately 6000 records
are stored in a circular buffer. This means that after about 6000 records, the
oldest ones will be deleted and new ones are created. On a very busy system,
6000 records may only cover a couple of days, but on a system with less
traffic, 6000 records may cover more than a month.When the CDR data is
streaming real-time from the Serial port, there is no buffer limit and no file
is generated on TalkSwitch. When a call event is completed, the record is
sent through Serial port.

4.2 RETRIEVING DATA

There are 2 different methods for retrieving the data from TalkSwitch:
• Web Interface — Store to File on TalkSwitch. (48-CA and 48-CVA models)
• Serial Interface — Real-time to Serial Port
While the TalkSwitch configuration software displays two options for Call
Logging Output, only the available option can be selected.
4.2.1 Web interface — Store to File on TalkSwitch
You can access the CDR information through a web interface as follows:
1. Enter the unit IP address in the Address field of a web browser.
Select System Information -> IP Configuration in the configuration
software to find the unit's IP address.
2. Enter the system name in the User Name field and the administrator
password in the Password field.
1 4 8 T A L K S W I T C H USE R GU I D E • N O R TH A M E R I C A