Mode Switching Options - Talkswitch 24-CA User Manual

If you have two or more units on a LAN, we recommend that you load a
.wav file to the system of units. If you use an external music source,
supply a music source to each TalkSwitch unit. 1/8" audio splitters are
available at most electronics stores.

3.10 MODE SWITCHING OPTIONS

Manual mode switching
Use telephone keypad commands at a local extension or at the auto
attendant to switch modes.
1. Dial #
enter command mode.
2. Enter a password if required.
a) Dial 30
b) Dial 31
c) Dial 32
Automatic mode switching using the time scheduler
Use the configuration software to activate the TalkSwitch time scheduler
feature. You can configure TalkSwitch to switch between modes
automatically (see 2.4.1 Modes on page 78).
If you switch modes manually, TalkSwitch switches to the proper mode
during the next scheduled mode change.
Ensure that the TalkSwitch configuration software tool is closed at the
time of the scheduled mode switch. The mode cannot change if the
configuration software is open.
U S I N G T A L K S W I T C H
at the local extension dial tone or at the auto attendant to
# to check the current mode.
to activate mode 1.
#
to activate mode 2.
#
1 4 3