Connecting Regular Multi-Line Phones; Connecting An Ip Phone; Attach An Internal Or An External Modem - Talkswitch 24-CA User Manual

Figure 19: Dual-line telephone on splitter
Incoming Phone Lines

1.8.2.3 Connecting regular multi-line phones

Figure 20: Four-line telephone
Incoming Phone Lines

1.8.2.4 Connecting an IP phone

Plug the IP phone into your switch/hub using the supplied RJ-45 cable.
Please refer to the IP Phone Configuration Guide in the TalkSwitch
documentation folder. If you are using a third-party IP phone, refer to the
user guide of the third-party IP phone for configuration instructions.

1.8.2.5 Attach an internal or an external modem

Plug the modem's telephone cable into a unit extension jack. Your modem is
now an extension that can access all lines and take advantage of call routing
features.
Modems connected to a unit operate at a maximum of 28 kbps.
If you don't want to change your dial-up settings for the modem, enable
Direct Line Access for the extension associated to the modem. For more
information, see 2.2.7 Local extensions on page 54.
1 8
TalkSwitch Jacks
E1 E2 E3 E4
Line Splitter
Extensions 111 and 112
TalkSwitch Jacks
E1 E2 E3 E4
Line Splitter Line Splitter
4-Line Phone
Extensions 111, 112, 113 114
&
T A L K S W I T C H US E R GU I D E • N OR TH A M E RI CA
TalkSwitch extensions 111 and 112 are
connected to a dual-line phone using a
line splitter. Calls on extension 111
show Line 1 as active. Calls on
extension 112 show Line 2 as active.
Jacks 111, 112, 113 and 114 are all
wired to the four-line phone. When a
call is transferred to extension 111,
Line 1 on the phone shows as active.
Calls on extension 112 show Line 2 as
active and so on. You may configure
each incoming line to ring any given
number of extensions. Configure
incoming Line 1 to ring extension 111,
Line 2 to ring extension 112, etc.