Serial Interface - Real-Time To Serial Port - Talkswitch 24-CA User Manual

Talkswitch - centrepoint technologies network hardware user manual
Hide thumbs Also See for TALKSWITCH 24-CA:
Table of Contents

Advertisement

Figure 117: CDR web interface
4.2.2 Serial interface — Real-time to Serial Port
In order to capture the data in a real-time environment your PC has to be
connected to TalkSwitch unit ID 1 with a serial cable.
1. Launch Hyper Terminal by clicking Start -> Programs ->
Accessories -> Communications -> HyperTerminal.
2. A window pops up prompting for a connection name. Enter TalkSwitch,
then click OK.
Figure 118: Launching HyperTerminal
3. In the Connect using: drop-down menu, select the PC COM port where the
serial cable is connected and click OK.
If you have not used HyperTerminal before you will be prompted to set
this program as a default telnet application and enter your area code.
1 5 0
T A L K S W I T C H USE R GU I D E • N O R TH A M E R I C A

Advertisement

Table of Contents
loading

This manual is also suitable for:

Talkswitch 48-ca/cvaTalkswitch 48-caTalkswitch 48-cva

Table of Contents