Black Box 32144 Manual page 75

(Table also applies to Dumb mode and Bell 208 operation)
Characters that can be pulse or tone dialed: 0-9
Can only be tone dialed:
@
! (exclamation)
L, P, T, and W may be entered as upper or lowercase letters. Spaces or
hyphens (-) may be used as separators for clarity; they will have no effect.
6.4 V.25 bis Result Codes
Table 6-3 explains the result codes,
or responses that may be displayed
on the DTE monitor in response to
V.25 bis commands.
Table 6-2. V.25 bis Dialing Parameters
CHAPTER 6: V.25 bis Autodialer
A,B, C, D, # and *
Wait for silence.
Flash hook
133