Table of Contents
Advertisement
MODEM 32144
Table 5-1. Hayes Compatible Commands (continued)
Command
&L
&M
&P
&Q
&Q0
&Q1
&Q2
&Q3
&R
&R0
&R1
&R2
&S
&S0
&S1
&S2
116
Function/Explanation
Modem displays OK result code; command has
no other effect. (The modem is configured for
leased line or dialup line operation via the
front-panel QUICK SETUP and/or LINE TYPE
screens.)
Can be substituted for &Q.
Modem displays OK result code; command has
no other effect. (The pulse dialing ratio is
factory-set, depending on whether the modem
is a US or international model.)
ASYNCHRONOUS/SYNCHRONOUS MODE
Asynchronous mode.
Synchronous mode 1—
Synchronous/asynchronous mode.
Synchronous mode 2—OFF-to-ON DTR
causes the modem to automatically dial a
stored number.
Synchronous mode 3—Synchronous mode with
manual dial. (A manually dialed call will switch
immediately to synchronous mode.)
RTS AND CTS OPTIONS*
CTS follows RTS.
CTS follows DTR from the DTE.
CTS is on while the modem is on-line.
DATA SET READY CONTROL*
DSR always on.
DSR operates on according to RS-232
specification.
Options DSR operation for a crossover
connection.
Hide quick links:
Advertisement
Table of Contents
